The center pivot is the system of choice for agricultural irrigation because of its low labor and maintenance requirements, convenience, flexibility, performance, and easy operation.
When properly designed and operated, and equipped with high efficiency water applicators, a center pivot system conserves three precious resources water, energy and time.
We have recently improved center pivot drive mechanisms (motors, gears and shafts), control devices, optional mainline pipe sizes and outlet spacings, span lengths, and structural strength.
The first pivots produced in the 1950s were propelled by water motors. They operated at high pressures of 80 to 100psi and were equipped with impact sprinklers and end guns that sprayed water toward the sky, resulting insignificant evaporation losses and high energy use.
Today, pivots are driven by electric, or oil hydraulic motors located at each tower and guided by a central control panel. Pressures as low as 10 to 15 psi (at the pivot mainline) are usually adequate for properly designed LESA (low elevation spray application) and LEPA (low energy precision application) pivots that are1/4 mile long operating on level to moderately sloping fields.
Water application efficiency with such systems is 85 to 98 percent.
SKY SULAMA pivot irrigation system consist of:
-
SKY SULAMA PIVOT CONTROL PANEL
-
Towers (Spans)
-
Center pivot point.
-
Drive unites.
-
Sprinklers
-
The Over-hang
Advantages of SKY SULAMA PIVOT irrigation system
-
No need to labor to operate this system, every system is supplied with remote control.
-
The manual control applied in the center point through the control panel.
-
High efficiency with all kinds of crops and soils.
-
The ability to add chemigations and fertilizing in this system.
-
By ending its tour, it return to the start point directly.
Irrigation Solution:
In addition to product center pivot irrigation systems, we produce the relative solution for it like pumps and generators.
